Passat Sedan V6-3.6L (BLV) (2008)
Hood Sensor/Switch (For Alarm): Service and Repair
Front Hood Switch (F266)
Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).
Remove hood lock.
Disengage harness connector - 2 - and disconnect it.
Unclip wire retainer - 1 -.
Cut cable tie - 2 -.
Disengage retaining lug - 1 - and move the Front Hood Switch in the longitudinal holes so that it can be removed.
Install in reverse order of removal.