Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Sensors and Switches > Sensors and Switches - Lighting and Horns > Ambient Light Sensor > Component Information > Testing and Inspection > Page 772

Page 1
background image

Ambient Light Sensor: Service and Repair

Rain/Light Recognition Sensor (G397)

The rain/light recognition sensor can be installed again if it is not damaged when removing it from the retaining plate on the windshield (for example
when replacing the windshield). Prior to reuse, ensure the rain/light recognition sensor is stored in a dust-free area, and that the silicone connecting
pad is not dirty.

Removing:

-

Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).

-

Remove interior mirror.

-

Unclip the wire cover routed over the rain/light recognition sensor. 

-

Disconnect harness connector - 1 - from rain/light recognition sensor - 2 -.

-

Using e.g. a phillips-head screwdriver, pry rain/light recognition sensor - 1 - out of retaining plate - 2 - on windshield.

Sensors and Switches > Sensors and Switches - Lighting and Horns > Ambient Light Sensor > Component Information > Testing and Inspection > Page 772

[PREV PAGE] [NEXT PAGE]