volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Drivers Front Airbag Crash Sensor G283|Page 1069 > < Drivers Front Airbag Crash Sensor G283|Page 1067
Page 1
background image

Impact Sensor: Service and Repair

Drivers Front Airbag Crash Sensor G283

Crash Sensors

Driver Front Airbag Crash Sensor G283

‹› The Driver Front Airbag Crash Sensor (G283) is installed behind the front lid lock.

Removal

CAUTION!
Read the Safety Instructions for working with airbags, belt tensioners and battery cut-out units.

-

Disconnect vehicle battery.

-

Press connector lock - 1 - and disconnect connector -  2 - from Driver Front Airbag Crash Sensor (G283) - 3 -.

-

Remove the two bolts - 4 - (5.4 Nm).

Installation

-

To install, perform the steps used for removal in reverse order. 

-

Switch on ignition.

CAUTION!
Make sure that no persons are in the vehicle.

-

Connect vehicle battery.

Driver Front Airbag Crash Sensor

Crash Sensors

Driver Front Airbag Crash Sensor

‹› The driver front airbag crash sensor (G283) is located on the left side of the lock carrier.

Removal

CAUTION!
Read the Safety Instructions for working with airbags, belt tensioners and battery cut-out units.

-

Disconnect vehicle battery.

Drivers Front Airbag Crash Sensor G283|Page 1069 > < Drivers Front Airbag Crash Sensor G283|Page 1067