Passat Sedan V6-3.6L (BLV) (2008)
/Page-324003.png)
-
Disconnect wiring harness in vehicles with seat heater - 3 -.
-
In vehicles with seat heater, disconnect wiring harness of heated backrest - 4 -.
-
Cut through holding strap of main wiring harness - 2 -.
-
Slide white holding plate - 1 - toward left and remove holding plate from seat frame.
-
Remove connector from holding plate.
CAUTION!
Do not disconnect connector from Seat Occupied Recognition Control Module (J706).
