Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Sensors and Switches > Sensors and Switches - Restraint Systems > Seat Occupant Sensor > Component Information > Service and Repair > Passive Occupant Detection System (Overview) > Page 1102

Page 11
background image

-

Disengage wiring harness of backrest from seat frame.

-

Remove front seat backrest. Refer to => [ Left Front Seat Backrest ] See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seats

-

Remove cover from front seat cushion. Refer to => [ Front Seat Cushion ] See: Body and Frame/Seats/Service and Repair/Overhaul/Seat
Upholstery, Covers/Front Seat Cover and Upholstery, upholstery must not be removed from seat frame while doing so! 

CAUTION!
Do not disconnect connector from Seat Occupied Recognition Control Module (J706).

-

Disconnect pressure hose - 1 - from guide.

-

Remove Seat Occupied Recognition Pressure Sensor (G452) - 4 - from bracket. Connectors must not be disconnected from Seat Occupied
Recognition Pressure Sensor (G452) and Seat Occupied Recognition Control Module (J706) - 5 -!

-

Remove the bolts - 2 - and - 3 - (1.5 Nm).

CAUTION!
Seals - 6
 - must not be operated.

Sensors and Switches > Sensors and Switches - Restraint Systems > Seat Occupant Sensor > Component Information > Service and Repair > Passive Occupant Detection System (Overview) > Page 1102

[PREV PAGE] [NEXT PAGE]