Volkswagen Workshop Manuals
Passat Sedan V6-3.6L (BLV) (2008)
Sensors and Switches > Sensors and Switches - Wiper and Washer Systems > Rain Sensor > Component Information > Service and Repair > Page 1242
‹› While removing, the complete rain/light recognition sensor and not only the upper shell of rain/light recognition sensor must be pried off.
Install in reverse order of removal, noting the following:
Thoroughly clean the area of the windshield inside the retaining plate with isopropyl alcohol.
Remove the cap from the new rain/light recognition sensor.
‹› Surface (connecting pads) of rain/light recognition sensor must not be soiled when installing.
‹› If the surface (connecting pads) of rain/light recognition sensor is soiled, it can be potentially cleaned by applying and then pulling off one or more
Insert the rain/light recognition sensor - 1 - into the retaining plate - 2 - on the windshield and press it in securely.
|[PREV PAGE] [NEXT PAGE]|