Passat Sedan V6-3.6L (BLV) (2008)
Jump Starting: Service and Repair
Jump Start Point With Suppressor
Jump Start Point with Suppressor
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1331)
Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).
Disconnect battery, refer to => [ Battery In Luggage Compartment, Disconnecting and Connecting ] See: Service and Repair/Removal and
Replacement/Battery In Luggage Compartment, Disconnecting and Connecting.
‹› Air filter housing is removed for reasons of clarity. It is not required when doing repairs.
Disengage retaining clip - arrow A - and open cover - 1 - over positive pole pick-up.
Disengage cover - 2 - over electrical wires in - direction of arrow B -.
Remove the nuts - 5 - and - 6 - on positive wires.