Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Starting and Charging > Power and Ground Distribution > Wiring Harness > Component Information > Description and Operation > Table of Contents > Page 5197

Page 2
background image

=> [ Primary Lock ] See: Primary Lock

=> [ Round Connector Systems ] See: Round Connector Systems

=> [ Flat Connector Systems ] See: Flat Connector Systems

=> [ Special Connector Systems ] See: Special Connector Systems

=> [ Contact Surface Cleaning Set ] See: Contact Surface Cleaning Set

=> [ Wiring Eyelets, Repairing ] See: Service and Repair/Procedures/Wiring Eyelets, Repairing

=> [ Threaded Connections, Repairing ] See: Service and Repair/Procedures/Threaded Connections, Repairing

=> [ Battery Terminal Clamp and Battery Terminal, Cleaning ] See: Service and Repair/Procedures/Battery Terminal Clamp and Battery
Terminal, Cleaning

=> [ Protecting Connections ] See: Protecting Connections

=> [ Oxygen Sensor Unit Protective Pipes ] See: Oxygen Sensor Unit Protective Pipes

Wiring

Description and Operation

=> [ Comfort System Central Control Module ] See: Body and Frame/Body Control Systems/Body Control Module/Description and Operation

=> [ Data Bus On Board Diagnostic Interface ] See: Powertrain Management/Computers and Control Systems/Information Bus/Description and
Operation

=> [ Towing Recognition Control Module ] See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Tow Sensor/Description and
Operation/Towing Recognition Control Module (J345)

=> [ Vehicle Electrical System Control Module ] See: Power Distribution Module/Description and Operation/Vehicle Electrical System Control
Module (J519)

VAS 1978 Upgrade Kit

VAS 1978 Upgrade Kit

The upgrade kit (VAS 1978/50) is required to bring the old wiring harness repair kit (VAS 1978) up to the new standard of the wiring harness repair
set (VAS1978A). The upgrade kit contains 4 assembly- and 10 release tools as well as new crimp pliers for crimp connections with changeable heads
for 0.35 - 2.5 mm 2 (VAS 1978/1-1), 4.0 - 6.0 mm² (VAS 1978/2 A) and changeable head for JPT (VAS 1978/9-1). Furthermore it contains
new stickers, a new set of user instructions, crimp connections for 0.35 mm 2-wire cross sections and a roll of black felt adhesive tape.

Release Tool Set

Starting and Charging > Power and Ground Distribution > Wiring Harness > Component Information > Description and Operation > Table of Contents > Page 5197

[PREV PAGE] [NEXT PAGE]