Volkswagen Workshop Manuals
Passat Sedan V6-3.6L (BLV) (2008)
Starting and Charging > Power and Ground Distribution > Wiring Harness > Component Information > Description and Operation > Table of Contents > Page 5207
Housing securing mechanism is released by opening a flap - arrow -.
Housing securing mechanism can be released by disengaging a slider - arrow -.
The primary lock is the locking mechanism of an individual crimp contact in the terminal housing.
If necessary, housing securing mechanisms (secondary locks) must be released or removed using specified tool before releasing the contacts. Refer to
The shapes of the primary locks depicted in the following are only a selection which, as an example, should make clear the various functions of the
‹› Round connector systems, refer to => [ Round Connector Systems ] See: Round Connector Systems
‹› Flat connector systems, refer to => [ Flat Connector Systems ] See: Flat Connector Systems
‹› Special connector systems, refer to => [ Special Connector Systems ] See: Special Connector Systems
The application of the correct release tools to the respective locks can be found in the table in operating Instructions for VAS 1978/35.
Round Connector Systems
|[PREV PAGE] [NEXT PAGE]|