Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Starting and Charging > Power and Ground Distribution > Wiring Harness > Component Information > Service Precautions > Fiber Optic Cables

Page 1
background image

Wiring Harness: Service Precautions
Fiber Optic Cables

Fiber Optic Cables

NOTE:  Observe general notes for repairs on the vehicle electrical system.

For Volkswagen, no repairs are performed on fiber optic cables. For a repair, the entire fiber optic cable is replaced. Observe the following safety
precautions for this:

NOTE:

-

Fiber optic cables must not be sharply bent, bending radius must be no less than 25 mm.

-

Fiber optic cables must not be routed over sharp edges.

-

End pieces (lenses) must not be soiled or grasped with bare fingers.

-

Fiber optic cables may not be heated.

-

It is not permitted to twist together two fiber optic cables or one fiber optic cable with a copper wire.

Starting and Charging > Power and Ground Distribution > Wiring Harness > Component Information > Service Precautions > Fiber Optic Cables

[PREV PAGE] [NEXT PAGE]