Volkswagen Workshop Manuals
Passat Sedan V6-3.6L (BLV) (2008)
Starting and Charging > Starting System > Start / Stop Switch > Component Information > Description and Operation > Electronic Ignition Switch (D9) > Page 4889
Start / Stop Switch: Description and Operation
Emergency Starting For Faulty Communication Between Id Sensor And Control Module
In the event that communication between ID sensor in ignition/starter switch button and Comfort System Central Control Module (J393) is faulty (e.g.
Remove the ignition/starter switch button from the electronic ignition lock.
To do this, release catch - 1 - by pulling slide - arrow - on bottom side back and pulling start button - 2 - out of electronic ignition lock.
Insert remote control ignition key into electronic ignition lock.
The ID sensor in ignition key is identified via a transponder in the electronic ignition lock and the steering is unlocked and start authorization is
Start process occurs in the same way as with the ignition/starter switch button.
‹› If ignition/starter switch button is reinserted into electronic ignition lock, make sure that locking latch - 1 - faces upward. Otherwise, the locking
latch does not lock in the ignition lock.
|[PREV PAGE] [NEXT PAGE]|