Volkswagen Workshop Manuals
Passat Sedan V6-3.6L (BLV) (2008)
Steering and Suspension > Alignment > System Information > Service and Repair > Wheel Alignment Test Prerequisites > Page 5640
1. Horizontal or measuring block 6-2 adjusting screw.
2. Vertical or measuring block 6-3 adjusting screw.
3. Must not be turned - functions only as a pivot point.
Explanation of Axles and Display in VAS 505X
Y Measuring block 6-2
Measuring block 6-3
Value 0.1 corresponds to 4 mm on (VAS 6041/2) and/or (VAS 6430)
With a measuring block 6-2, display in VAS 505X shows a value of 0.6 and measuring block 6-3 a value of -1.0.
These values lead to a measuring point - arrow - that consists of the following values:
- a - = 24 mm
- b - = 40 mm
Menu in VAS 505X:
Press the following buttons on the screen one after the other:
|[PREV PAGE] [NEXT PAGE]|