Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Steering and Suspension > Relays and Modules - Steering and Suspension > Relays and Modules - Steering > Steering Column Control Module > Component Information > Technical Service Bulletins > Electrical - Steering Column Electronics Coding Info.

Page 1
background image

Steering Column Control Module: Technical Service Bulletins
Electrical - Steering Column Electronics Coding Info.

91 10 08 

March 22, 2010 

2022845

Vehicle Information

Condition

Steering Column Electronics, Perform Coding After Replacement

Technical Background

After replacing the steering column electronics -J527-, the ignition cannot be switched ON and the "S" contact is not recognized.

Production Solution

Not applicable.

Service

Code Steering Column Electronics

Tip:
Code the Steering Column Electronics Control Unit before performing any other work, including with the immobilizer.

Note:

The first digit of the control unit code MUST NOT be "1" otherwise the unit will be rendered un-useable and will have to be replaced. Units replaced
for this condition are not warrantable.

Example of incorrect coding: "1xxxxxx"

Warranty

Information only.

Required Parts and Tools

No Special Parts required.

Additional Information

All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair
Manuals for the latest information.

Steering and Suspension > Relays and Modules - Steering and Suspension > Relays and Modules - Steering > Steering Column Control Module > Component Information > Technical Service Bulletins > Electrical - Steering Column Electronics Coding Info.

[PREV PAGE] [NEXT PAGE]