Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Steering and Suspension > Sensors and Switches - Steering and Suspension > Sensors and Switches - Steering > Steering Angle Sensor > Component Information > Service and Repair > Procedures > Page 5712

Page 1
background image

Steering Angle Sensor: Removal and Replacement

Steering Column Switch

Steering Angle Sensor Segment Sensor, Through 10.09

Removing:

-

Disconnect battery. Refer to => [ Battery, Disconnecting and Connecting ] See: Starting and Charging/Battery/Service and
Repair/Procedures/Battery, Disconnecting and Connecting. 

Remove the following components in order:

-

Remove steering wheel.

-

Remove steering column trim.

-

Remove Steering Column Electronic Systems Control Module (J527). Refer to => [ Steering Column Electronic Systems Control Module,
Through 10.09 ]. See: Lighting and Horns/Sensors and Switches - Lighting and Horns/Combination Switch/Service and Repair/Steering Column
Switch/Steering Column Electronic Systems Control Module (J527), Through 10.09

-

Remove Airbag Spiral Spring/Return Spring With Slip Ring (F138). Refer to=> [ Airbag Spiral Spring/Return Spring With Slip Ring, Through
10.09 ]. See: Lighting and Horns/Sensors and Switches - Lighting and Horns/Combination Switch/Service and Repair/Steering Column
Switch/Airbag Spiral Spring/Return Spring With Slip Ring (F138), Through 10.09

-

Disengage catches - arrows - and pull off segment sensor for steering angle sensor - 1 - toward rear from steering column switch unit.

Installing:

Install in reverse order of removal.

Steering and Suspension > Sensors and Switches - Steering and Suspension > Sensors and Switches - Steering > Steering Angle Sensor > Component Information > Service and Repair > Procedures > Page 5712

[PREV PAGE] [NEXT PAGE]