Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Steering and Suspension > Sensors and Switches - Steering and Suspension > Sensors and Switches - Suspension > Ride Height Sensor, Suspension Control > Component Information > Service and Repair > Front Suspension > Page 5744

Page 4
background image

‹› Removing and installing, refer to => [ Front Left and Right Level Control System Sensor ] See: Front Left and Right Level Control System

Sensor. 

‹› If the left front level control system sensor (G78) and the right front level control sensor (G289) were removed and installed, then a basic

setting to the adaptive chassis DCC must be performed. Refer to => [ Adaptive Chassis DCC, Basic Setting ] See: Suspension/Suspension
Control ( Automatic - Electronic )/Testing and Inspection/Programming and Relearning. 

‹› After replacing, perform basic setting of the headlamps.

Headlamps basic setting is performed via the Guided Fault Finding function using the Vehicle Diagnosis, Testing and Information System (VAS
5051).

4

Control Arm

5

Nut

‹› 9 Nm

‹› Self-locking

‹› Always replace after removal.

Left Rear Level Control System Sensor Assembly Overview, FWD

Left Rear Level Control System Sensor Assembly Overview, FWD

‹› Vehicle level sensor is available as replacement part only complete with coupling rod and upper and lower retaining plates.

‹› Replacing with subframe installed, refer to => [ Left Rear Level Control System Sensor, FWD ] See: Left Rear Level Control System Sensor,

FWD.

Steering and Suspension > Sensors and Switches - Steering and Suspension > Sensors and Switches - Suspension > Ride Height Sensor, Suspension Control > Component Information > Service and Repair > Front Suspension > Page 5744

[PREV PAGE] [NEXT PAGE]