Passat Sedan V6-3.6L (BLV) (2008)
Front Cross-Member: Service and Repair
Subframe Without Steering Gear
Subframe without Steering Gear
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1331)
‹› Torque wrench (V.A.G 1332)
‹› Engine/transmission jack (V.A.G 1383 A)
Removing
‹› Subframe is removed together with control arms.
-
Remove lower noise insulation.
-
Remove wheels.
-
Remove nuts - arrows - on left and right side of vehicle.
-
Pull control arm out of lower ball joint.
-
Remove bracket for exhaust system from the subframe.
-
Remove bolts - arrows - from heat shield.