Passat Sedan V6-3.6L (BLV) (2008)
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1331)
Removing
-
Disconnect the connector - 1 -.
-
Remove the bolts - 2 - from the lower transverse link.
-
Remove bolts - arrows - from the subframe.
-
Remove left rear level control system sensor.
Installing
Installation is performed in the reverse order of removal. Observe the following when doing so:
The left rear level control system sensor lever must point toward the outside of the vehicle.
-
After replacing, perform a headlamp basic setting.
Tightening Specifications