Passat Sedan V6-3.6L (BLV) (2008)
‹› If the (T10398) falls out:
-
Install the (T10398) to the seal with 120 Nm of force.
-
Remove the seal.
Installing
-
Install the seal - 1 - onto the (T10400).
The spring - arrow - points away from the thrust piece.
-
Drive in seal until seated
-
Turn the (T10400) inside the transmission before removing it.
-
Install the bevel box, refer to one of the following:
Passat and CC, refer to => [ Bevel Box ] .
Tiguan, refer to => [ Bevel Box ] .
-
Check the Automatic Transmission Fluid (ATF) level and top off if necessary. Refer to => [ Automatic Transmission Fluid Level, Checking and
Filling ] See: Fluid - A/T/Service and Repair/Automatic Transmission Fluid Level, Checking and Filling.