Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Sensors and Switches - A/T > Transmission Speed Sensor, A/T > Component Information > Service and Repair > Transmission Input Speed Sensor > Page 3921

Page 1
background image

Transmission Speed Sensor: Service and Repair
Transmission Output Speed Sensor

Transmission Output Speed Sensor

Removing

-

Remove the valve body. Refer to => [ Valve Body ] See: Valve Body/Service and Repair/Valve Body.

-

Remove the bolt - 2 - for the transmission output speed (RPM) sensor (G195).

-

Remove the sensor from the transmission.

Installing

Installation is performed in the reverse order of removal. Pay attention to the following:

-

Press the sensor into the transmission until seated.

-

Install the bolt - 2 - for the transmission output speed (RPM) sensor. Tightening specification, refer to => [ Fastener Tightening Specifications ] 
See: Valve Body/Specifications/Fastener Tightening Specifications - Gears, Hydraulic Controls.

-

Install the valve body. Refer to => [ Valve Body ] See: Valve Body/Service and Repair/Valve Body.

Transmission and Drivetrain > Automatic Transmission/Transaxle > Sensors and Switches - A/T > Transmission Speed Sensor, A/T > Component Information > Service and Repair > Transmission Input Speed Sensor > Page 3921

[PREV PAGE] [NEXT PAGE]