Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Transmission Position Switch/Sensor, A/T > Component Information > Locations > Page 3980

Page 4
background image

-

Shift the transmission to the "P" position using the lever - 3 -. To do so, push the lever -  - rearward against the direction of travel until it stops.

-

Shift the transmission to the "N" position using the lever - 3 -. To do so, press the lever -  3 - two latched positions toward the front in the direction
of travel.

-

Install the spring washer - 2 - and nut -  1 - onto the shift rod - 4 -.

-

Tighten the nut - 1 - to 13 Nm.

6 Cylinder Gas Vehicles

-

Install the coolant expansion tank.

-

Connect the battery Ground (GND) cable with the ignition turned off.

Continuation For All Vehicles

-

Check the shift mechanism. Refer to => [ Selector Mechanism, Checking ] See: Shifter A/T/Testing and Inspection/Component Tests and General
Diagnostics.

Transmission and Drivetrain > Automatic Transmission/Transaxle > Transmission Position Switch/Sensor, A/T > Component Information > Locations > Page 3980

[PREV PAGE] [NEXT PAGE]