Passat Sedan 4Motion V6-2.8L (ATQ) (2003)
-
Use a screwdriver to unclip upper battery - 1 - out of holders - 2 - in direction of - arrow -.
-
Contact plate - 1 - has two straight edges. Contact plate can be removed when se edges are turned in direction of catches.
-
Contact plate can also be unclipped using a screwdriver.
-
Now unclip lower battery from holder using a screwdriver.
Installing
-
Note polarity and installation position of batteries when installing.
-
Place battery - 4 - in transmitter with positive terminal downward (positive terminal is marked in housing).
-
Place contact plate - 3 - onto battery - 4 -.
-
Place battery - 2 - onto contact plate with positive terminal downward and lock.
-
Connect transmitter - 1 - to transmitter - 5 - and clip.
-
Clip transmitter unit to main key.