Passat Sedan 4Motion V6-2.8L (ATQ) (2003)
/Page-2001001.png)
Navigation Display: Service and Repair
Adaptation (function 10)
Using the adaptation function, the following changes can be made and saved.
-
Adaptation of Service Reminder Indicator (SRI)
-
Adaptation of odometer for replacement of instrument cluster
-
Resetting Service Reminder indicator (SRI)
-
Adaptation of fuel gauge
-
Correcting fuel consumption indicator
-
Coding of language version for indicator unit for navigation (only for Midline and Highline instrument clusters)
-
Coding of diagnostic interface for CAN-bus.
Individual functions are called up by entering the appropriate adaptation channel numbers (listed in the adaptation table).
Adaptation table:
Adaptation channel Adaptation function
02
Resetting Service Reminder Indicator (SRI).
04
Language versions for driver instructions (only for Highline and Midline instrument clusters).
09
Adaptation of odometer.
10
Service interval data for oil service (OIL) trip counter.
11
Service interval data for inspection (INSP) - trip counter.
12
Service interval data for inspection (INSP) - counter for time in 10 day intervals.
30
Adaptation of fuel gauge.
40
Service interval data - counter for distance travelled since last inspection.
Adaptation channel Adaptation function
41
Service interval data counter for time since last inspection.
42
Service interval data lower limit for distance travelled until inspection.
43
Service interval data upper limit for distance travelled until inspection.
44
Service interval data upper limit for time until inspection.
45
Service interval data value for oil quality for flexible service intervals.
46
Service interval data for total fuel consumption quantity in liters/cylinder, only for gas engines (transmitted by Engine Control
Module -ECM-)
47
Service interval data for carbon quantity (only diesel engines, transmitted by Engine Control Module -ECM-)
48
Service interval data for oil wear (only diesel engines, transmitted by Engine Control Module -ECM-)
NOTE: After changing an adaptation value or ending an adaptation channel, "Adaptation " function 10 must be performed again before selecting another
adaptation channel.
