Passat Sedan 4Motion V6-2.8L (ATQ) (2003)
Radio/Stereo: Service and Repair
"Premium VI" (Incl. "Monsoon"), Removing and Installing
"Premium VI" (incl. "Monsoon") removing and installing
Special tools, testers, and auxiliary items needed
-
Recommended: Radio removal tool JC4225
-
Optional: Radio removal tool set T10057 (two identical pieces).
NOTE:
Individual tools are marked "Top L" for and both left upper and lower openings and "Top R" for both right upper and lower openings.
Removing
CAUTION: Before beginning repairs on the electrical system:
Obtain the anti-theft radio security code.
Switch off all electrical consumers.
Switch ignition off and remove ignition key.
-
Insert tools into openings on face of radio -arrows- until they engage.
NOTE:
Use of separate tools T10057 is illustrated here. Procedure is essentially the same for tool JC4225 where all release prongs are integrated
into a frame.
-
Pull radio from instrument panel using handles on tools T10057 or frame of tool JC4225
-
Disconnect electrical connection and antenna cable connection
Note:
Radio must be pulled straight out from opening. Do not twist or tilt tools while removing.