Passat Sedan 4Motion V6-2.8L (ATQ) (2003)
/Page-2091002.png)
-
Remove bolt - 1 -.
-
Unclip door trim at the sides using Pliers 3392.
-
Lift door trim upward out of window recess.
-
Pull cable - 1 - out of guide - 2 - in direction of arrow and disengage.
-
Disconnect harness connector - 3 -.
Installing
-
Pull off window recess seal - 1 - from door trim and insert in window recess.
NOTE: Replace clips before installing door trim.
