Passat Sedan 4Motion V6-2.8L (ATQ) (2003)
Scuff Plate: Service and Repair
Sill Panel Trim, Removing And Installing
Removing
NOTE: The illustrations cover only one side of vehicle, the other side of vehicle is the mirror image.
-
Disengage backrest for rear seatbench and push forward.
-
Loosen hex nut - 2 - and remove lock bolt - 3 -.
-
Pull upholstery - 1 - in upper area out of clip - 4 -, press lower tab - 6 - to rear from sill panel - 7 - and remove upward with tab - 5 -.
-
Remove bolts - 1 -.
-
Remove trim - 2 - from clip - 3 - and from C-pillar.