Passat Sedan 4Motion V6-2.8L (ATQ) (2003)
Sunroof / Moonroof Windguard: Service and Repair
Wind Deflector, Removing And Installing Removing
-
Open sunroof glass panel completely.
-
Press wind deflector with height stop out of front roof cut-out and tilt wind deflector open vertically.
-
Insert special tool Hook for front end 3370 between roof edge and wind deflector bearing - arrow -.
-
Pull wind deflector bearing out of side locking mechanism of left and right guide rails using special tool Hook for front end 3370 in direction of -
arrow -.
-
Remove wind deflector upward from guide rail.
Installing
-
Insert wind deflector into guide rail and slide wind deflector with height stop under front roof cut-out at left and right sides.
-
Using light pressure, press wind deflector bearing into guide rails.
NOTE: Wind deflector bearing must engage in guide rails audibly.