Passat Sedan 4Motion V6-2.8L (ATQ) (2003)
/Page-1518011.png)
^
VAG1331 Torque wrench (or equivalent)
^
VAG1410 Torque wrench (or equivalent)
^
VAG1869/2 Brake pedal depressor
Note:
^
Install complete repair kit.
^
After replacing brake pads and with vehicle stationary depress brake pedal firmly several times so that the brake pads are properly seated in their
normal operating position.
^
To draw off brake fluid from the reservoir, use a bleeder bottle which is used only for brake fluid. Brake fluid is poisonous, NEVER siphon brake
fluid with your mouth!
^
Wheel bolt tightening torque, Refer to Steering and Suspension, Wheels and Tires
1 - Brake hose
^
Do not disconnect brake hose when changing brake pads
2 - Protective cap
^
Remove
3 - Guide pins, 25 Nm
4 - Brake line, 15 Nm
^
Screw into brake caliper housing
^
Screw into brake hose, counter hold on brake hose hex.
^
Make sure that lugs are properly seated in retainer grooves.
5 - Brake caliper
^
Do not disconnect brake hose when changing brake pads
Removing:
-
Remove brake pads, Refer to Brake Pads, Removing and Installing, See -item 13
-
Install brake pedal depressor VAG1869/2
-
Remove brake hose -item 1 - from brake caliper
^
Installing:
-
Install brake pads, Refer to Brake Pads, Removing and Installing, See -item 13
-
Install brake hose -item 1 - onto brake caliper
