volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Cruise Control System (CSS) W/O Electronic Power Control (EPC)|Page 182 > < Cruise Control Module|Locations
Page 1
background image

Cruise Control Module: Service and Repair
Cruise Control System (CSS) W/O Electronic Power Control (EPC)

 

Cruise Control System (CSS) On Vehicles Without Electronic Power Control (EPC), Servicing

CAUTION!
Before beginning repairs on the electrical system:

-

Obtain the anti-theft radio security code.

-

Switch the ignition off.

-

Disconnect the battery Ground (GND) strap.

-

After reconnecting battery, re-code and check operation of anti-theft radio.

Cruise control, control module -J213-, removing and installing

The cruise control, control module -J213- is located behind the airbag unit on front passenger's side.

Removing

-

Remove glove box

-

Disconnect electrical connector

-

Remove screw -4-.

-

Pull control module -3- out of retainer lip -inset- and remove.

Installing:

-

Insert control module -3- bracket tab into retainer lip -inset-.

-

Install screw -4-.

-

Reconnect electrical connector

Cruise Control System (CSS) W/O Electronic Power Control (EPC)|Page 182 > < Cruise Control Module|Locations