Passat Sedan 4Motion V6-2.8L (ATQ) (2003)
Note: The nut -8- may be turned with a wrench or impact driver.
-
Unscrew nut -8- from threaded sleeve -4-, remove thrust rod -5- and insert thrust rod -6- in threaded sleeve -4-.
-
Repeat pressing procedure.
-
If bolt still cannot be removed by hand, repeat pressing procedure with thrust rod -7-.
-
Unscrew nut -8- from threaded sleeve -4-, remove thrust rod and bolt.
-
Screw thrust bolt -3- into one guide after the other -A- and press links -B- out of wheel bearing housing.
-
Unscrew thrust bolt -3- out of guide -A- and loosen adapter -2-.
-
Remove main body -1- from wheel bearing housing.