Passat Sedan 4Motion V6-2.8L (ATQ) (2003)
-
Insert a punch -1- or similar through the shock absorber bushing hole.
-
Remove lower hex bolt for coupling rod.
Installing
Install in reverse order
-
Install wheel and tighten.
Tightening torques:
Shock absorber to control arm
*Self-locking nut, .............................................................................................................................................................................................. 70 Nm
Coupling rod to wheel bearing housing
Hex bolt, ............................................................................................................................................................................................................ 55 Nm
Stabilizer bar clamp to subframe
*Self-locking nut, .............................................................................................................................................................................................. 20 Nm
Coupling rod to stabilizer bar
*Self-locking nut, .............................................................................................................................................................................................. 50 Nm
*Replace each time after removing