Passat Sedan 4Motion V6-2.8L (ATQ) (2003)
Seals and Gaskets: By Symptom
Technical Service Bulletin # 3206-01
Date: 060817
A/T - MIL ON/DTC 17125/P0741 Set
Condition
MIL Illuminated, DTC 17125, P0741 Stored In Transmission Fault Memory-No Driveability Concern
Malfunction Indicator Lamp (MIL) Illuminated, DTC P0741 17125 Clutch for torque converter bridging, no power transfer stored in fault memory, no
driveablity concern.
32 06 01 Aug. 17.2006.2011908
Technical Background
May be caused by torque converter internal oil seal failure (no external leaks).
Production Solution
Optimized shaft seal ring in the torque converter as of transmission serial numbers listed in table below
Service
Identify the transmission and record serial number on 5 and 6 speed Transmission Concern Form, see Repair Manual 5 Spd. Automatic Transmission 01
L, 01V General, Technical Data, Transmission identification.
NOTE:
The following tests must be performed and recorded before repairs.
-
Engine running and at operating temperature.
-
Check transmission fluid level, and Only if necessary, adjust per Repair Manual Group 37 - Automatic Transmission - Controls, Housing, ATF
level, checking and topping off.
-
Connect the VAS 5051 or 5052 diagnostic tool.
-
From VAS 5051 VAS 5052 Start-up screen, select "Vehicle self diagnosis".
-
Select Diagnosis function "02-Gearbox electronics".
Similar Screen Appears.
-
Select diagnosis function "008 - Coding (Service 22).