Passat Sedan 4Motion V6-2.8L (ATQ) (2003)
Fig. 8 Pressing wheel bearing -A- into 82 mm diameter wheel bearing housing
Note: Larger internal diameter of wheel bearing faces wheel hub.
Fig. 9 Pressing wheel hub into 75 mm diameter wheel bearing
-
When pressing in, the thrust piece VW519 must bear only against inner race.
Note: The wheel bearing housing must remain as horizontal as possible when pressing in.
Otherwise the wheel hub will bend in the wheel bearing which will lead to premature wheel bearing damage.
Fig. 10 Pressing wheel hub into 82 mm diameter wheel bearing
-
When pressing in, the thrust piece VW447i must only bear against inner race.
Note: The wheel bearing housing must remain as horizontal as possible when pressing in.
Otherwise the wheel hub will bend in the wheel bearing which will lead to premature wheel bearing damage.
Front Wheel Bearing, Pressing With Bearing Housing Installed
Front wheel bearing, pressing out and in with wheel bearing housing installed
Special tools and equipment required