Passat Sedan 4Motion V6-3.6L (BLV) (2007)
-
Spray binding profile - 5 - with soap solution so that plenum chamber covers - 1 and 3 - can be pressed in more easily.
-
Place plenum chamber covers - 1 and 2 - onto binding profile - 4 - and clip it into binding profile starting from center using light pressure. Begin
with plenum chamber cover lying on bottom.
-
Attach the plenum chamber cover to the plenum chamber bulkhead with the clips - 5 -.
-
Install seal - 6 - on to plenum chamber cover and windshield wipers.
‹› New windshields have a insert in the binding profile. Remove the insert before installing the plenum chamber cover.