Passat Sedan 4Motion W8-4.0L (BDP) (2002)
Recommended special tools and equipment
-
Body saw (e.g. VAG1523 body repair saw)
Work procedure
-
Separate connecting pipe between center muffler and rear muffler at the location marked with a groove:
Dimension -a- approx. 244 mm.
Fig. 2 Installation position of double clamps
Fig. 3 Installation position of replacement double clamps in direction of travel
1
Screw tips must not project beyond the lower edge of the clamp.
2
Angle 10 degrees to 15 degrees.