Passat Sedan 4Motion W8-4.0L (BDP) (2002)
-
Before beginning wiring and connector repairs, determine and rectify the cause of damage, eg.: pinched between metal parts, malfunctioning
electrical consumers, corrosion due to water ingress etc.
-
All shielded wiring (eg.: knock sensors, antenna etc.) are Not to be repaired! Replace complete wiring harnesses as necessary.
-
When repairing airbag wiring harnesses, use only prescribed terminals, connectors and wiring See applicable parts catalog.
-
Only the yellow repair cables and insulation tape supplied with VAS 1978 are to be used for wiring/connector repairs. The use of yellow repair
wires and yellow insulation tape identifies that a repair has taken place!
-
When repairs are completed, always perform a functional check of the component or system. Where applicable, check and erase Diagnostic
Trouble Codes (DTCs) and set basic setting.
-
Additional information on removal and installation of electrical and related components.