Passat Syncro Wagon V6-2.8L (ATQ) (2000)
On Board Diagnostic (OBD)
HELP
1 - Rapid data transfer*
2 - Blink code output*
* Is displayed alternately
Functions, selecting
NOTE:
-
If the display remains blank check Scan Tool (ST) voltage supply according to wiring diagram.
-
Additional operating instructions can be called up by pressing the HELP button.
-
The -> button is used to advance through the program sequence.
-
In operating mode 1 "Rapid data transfer," function 00 "Automatic test sequence" can be carried out. The DTC memory of all control modules
with OBD capability are checked automatically.
-
During OBD program, radio is automatically muted.
-
Switch on ignition.
-
Switch on printer with the Print button (indicator lamp in button lights up).
-
Press button 1 for "Rapid data transfer" mode.
Indicated on display:
Rapid data transfer
HELP
Input address word XX
-
Press buttons -5- and -6- to select Radio address word 56.
Indicated on display:
Rapid data transfer
Q
56 - Radio
-
Press -Q- button to confirm input.
Indicated on display:
Rapid data transfer
Q
Tester sends address word 56
Radio version, checking
Indicated on display (example only):
1JO035152 Radio
0001
->
Coding XXXXX
WSC 00000
Readout, top line
-
1JO 035 152 = Radio part number (example only)
-
Radio = System designation (example only, dependant on radio system installed)
-
0001 = Software version
Readout, bottom line
-
Coding XXXXX = coding number (dependant on model, radio system and optional equipment). See: Programming and Relearning
-
WSC 00000 = Workshop code
CAUTION!
Part numbers are for reference only. Always check with your Parts Department for the latest parts information.
-
Press -> button.
Indicated on radio display (and instrument cluster display where applicable) during OBD:
NOTE:
If this message appears in the display: