Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Identification of driver's door control module is indicated on display.
-
Press the --> button.
Identification of passenger's door control module is indicated on display.
-
Press the --> button.
Note:
Control modules for the rear doors on four door models will also be identified.
After all control modules are displayed:
Indicated on display.
-
Press buttons -0- and -2- to select "Check DTC Memory" function 02.
-
Press -Q- button to confirm input.
If DTC's are found:
-
Correct as necessary.
If no DTC's are found:
-
Press the --> button.
Read Measuring value blocks from lock switches for open or closed contacts as follows:
Indicated on display.
-
Press buttons -0- and -8- to select "Read Measuring Value Block".
Press -Q- button to confirm input.
Indicated on display.