Passat Syncro Wagon V6-2.8L (ATQ) (2000)
After all control modules are displayed:
Indicated on display.
-
Press buttons -0- and -2- to select "Check DTC Memory" function 02.
-
Press -Q- button to confirm input.
If DTC's are found:
-
Correct as necessary.
If no DTC's are found:
-
Press the --> button.
Read Measuring value blocks from lock switches for open or closed contacts as follows:
Indicated on display.
-
Press buttons -0- and -8- to select "Read Measuring Value Block".
Press -Q- button to confirm input.
Indicated on display.
-
Press buttons -0- and -0- and -3- to input display group number 3 (003).
Display field 3 will read Locked or unlocked depending on door lock position.
-
Use power door lock switch to lock and unlock door several times while observing display.
Display should change to locked or unlocked as door is locked or unlocked.
-
Press the --> button and repeat reading Measuring Value Block for passenger door and (rear doors on Passat vehicles).
Indicated on display.
-
Press buttons -0- and -8- to select "Read Measuring Value Block".