Passat Syncro Wagon V6-2.8L (ATQ) (2000)
-
Remove bolts - 2 - at top and bottom from cover - 1 -.
-
Remove bolts - 3 - in area of wheel housings.
-
With a second mechanic, pull cover parallel out of guides.
-
Harness connectors must be disconnected from installed electrical components.
Installing
Installation is reverse order of removal.
-
Make sure gaps are parallel and gap dimensions.
Rear Bumper Cover Accessories, Assembly Overview
Rear Bumper Cover Accessories, Assembly Overview 10.00 -->