Passat Syncro Wagon V6-2.8L (ATQ) (2000)
-
Drive out clips - 1 - using a drift.
-
Unclip cable - 2 - from clip - 1 -.
-
Using a screwdriver - 3 -, Remove door lock with retaining bracket from assembly carrier.
NOTE: Retaining bracket is not part of parts supplied with door lock. It is secured to door lock with a bolt and a blind rivet.
-
Unclip locking rod - 1 -. To do so, turn door lock in direction of - arrow -.
-
Unclip cable - 2 -.
-
Turn nipple of cable 90° and remove from eyelet.
Installing
-
Retrofit cover for all vehicles --> 09.99.
-
Insert assembly carrier into door.
-
Insert bolts and tighten in specified sequence, tightening torque: 8 Nm.
-
Loosen clamping brackets, press door window - 1 - into window channel - arrow - and tighten clamping brackets with bolts - 2 -.