Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Splash Guard: Service and Repair
Closing Piece, Removing and Installing
Closing Piece, Removing And Installing
Removing
-
Remove wheelhousing liner.
-
Remove bolt - 2 - from expanding clips - 1 - (tightening torque 2.5 Nm).
-
Drill out plastic rivet - 4 -.
-
Remove end plate - 3 - from front fender.
Installing
-
Plastic rivet can be pulled in using Riveting pliers V.A.G 1753 A if mouth piece is first removed from riveting pliers.