Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Sunroof / Moonroof Weatherstrip: Adjustments
Panel Seal, Adjusting
-
Using a strip of cardboard about 0.3 mm thick (e.g. business card), check if pretension between panel seal - 2 - and body is even all around.
Cardboard should slide through gap with firm resistance.
-
Removing glass panel for sunroof.
-
If pre-tension is insufficient, panel seal - 2 - can be pressed apart using a Trim removal wedge 3409 - 1 -.
-
If pre-tension is too high, press panel seal - 1 - together all around using Application roller 3356.