Passat Syncro Wagon V6-2.8L (ATQ) (2000)
-
Pull 5 pin connector -1- off ignition coil final stage -2-.
-
Remove fuse 28 (fuel pump) or pull connectors off all injectors.
-
Have a second technician fully depress accelerator pedal.
-
Check compression with compression tester VAG1381/VAG1763, operating starter until tester shows no further pressure increase.
Note: See relevant test unit operating instructions for instructions on how to use test unit.
Compression pressure:
-
New: 9 - 14 bar
-
Wear limit: 7.5 bar
Permissible difference between all cylinders: 3 bar