Passat Syncro Wagon V6-2.8L (ATQ) (2000)
-
Apply a small quantity of sealant Part No: AMV 174 004 01 to sides of joints (arrows) on upper sealing surface of cylinder head.
Sealing Camshaft Adjuster/Cylinder Head Transition (4 points):
-
Apply a small quantity of sealant Part No: AMV 174 004 01 to sides of joints (arrows) on upper sealing surface of cylinder head.
Tip:
^
Apply sealant prior to installing gaskets.
^
Sealant is considered shop supplies and may not be claimed under warranty Also, additional time to add sealant is not claimable under warranty
^
Always refer to the Repair Manual and published Technical Bulletins for latest repair information.
^
In cases where parts are replaced, perform test drive to verify oil leak is eliminated.
^
If oil leak is traced to cylinder head cover gasket you must file the claim under PID 1580.
Warranty:
For warranty information and procedures regarding this technical bulletin, please follow indications included in the Warranty Service Circular "Oil
Leaks From Upper Engine Area", VWA-05-31 dated Nov. 2, 2005.