Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Note:
The fuel level sending unit will need to be turned slightly clockwise for removal. Also, this is a tight fit with minimal clearance for removal. Reinsert
fuel level sending unit several times to learn removal and install prior to installing new fuel level sending unit.
^
Carefully install new fuel level sending unit -2- (3B0 201 317P) and new seal (6N0 919 133).
CAUTION!
Do not bend float arm of fuel level sending unit.
^
While inserting sender, turn slightly clockwise on its own axis.
^
Hold fuel level sending unit above the fuel tank, install new seal onto the fuel tank and insert the fuel level sending unit into the seal.
Note:
Arrow in illustration references front of vehicle.
^
Prior to installing the nut, make certain the fuel level sending unit is in the correct position; the arrow -2- on the sender MUST be aligned with the
arrow -1- on the fuel tank.