Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Headlamp Alignment Control Module: Service and Repair
Control Module For Headlight Beam Adjusting -J431- Removing And Installing
Control module is mounted in left luggage compartment behind left rear luggage compartment trim.
Removing
-
Remove left rear luggage compartment trim
-
If necessary, remove CD changer and changer mounting
-
Disconnect electrical connection -1-, remove screws -arrows- and remove control module -2-.
Installing
Installation is in reverse order of removal
-
After installation, check function of headlights.
-
Code control module
-
Bring headlight into basic setting