Passat Syncro Wagon V6-2.8L (ATQ) (2000)
-
Remove the screws -arrows-.
-
Remove the hex socket head bolt -1-.
-
Loosen steering wheel height adjuster -2-.
-
Remove the lower steering column switch trim -3-.
-
Loosen the hex socket head bolt -1-.
-
Seperate the connectors -arrows- from the steering column switch.
Caution!
Airbag Spiral Spring/ Return Spring With Slip Ring -F138- remain on steering column switch. Make sure Airbag Spiral Spring/ Return
Spring With Slip Ring -F138- are not twisted out of center position.
-
Remove the steering column switch.
Installing: