Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Fluid - Transfer Case: Testing and Inspection
Gear oil in transfer gearbox
Gear oil level in transfer gearbox, checking
-
Separate right-hand exhaust pipe from rear exhaust system at double clamp. Push front exhaust pipe in area of Three Way Catalytic Converter
(TWC) to right. Refer to Exhaust System.
-
Remove filler plug (arrow -B-) to check gear oil level and top off to lower edge of hole with gear oil.
^
Gear oil specification.
^
Always replace filler plug
-
Install new filler plug.
Tightening torque: 35 Nm (26 ft. lbs.)