Passat Syncro Wagon V6-2.8L (ATQ) (2000)
Indicated on display:
XXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXX
->
-
Upper line
Vehicle Identification Number (VIN), ( 17-digit, WVW....) Identification number,(14-digit, VW...)
For new control modules, place holders are indicated before adaptation instead of the Vehicle Identification Number (VIN) and the identification number
of the immobilizer.
NOTE:
-
If an Engine Control Module (ECM) is being installed that has already been adapted to a different immobilizer, it must first be unlocked via a
Login Procedure.
-
The secret number must be determined via the 14-digit identification number of this Engine Control Module (ECM). Continue as follows after
successful Login Procedure:
-
Press -> button.
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press buttons -1- and -0- to select "Adaptation", function 10.
Indicated on display:
Rapid data transfer
Q
10 - Adaptation
-
Press -Q- button to confirm input.
Indicated on display:
Adaptation
Enter channel number XX
-
Press buttons -5- and -0- to select "channel 50".
-
Press -Q- button to confirm input.
Indicated on display:
Channel 50 adaptation 32000
->
PIN ?
-
Press -> button.
Indicated on display:
Channel 50 adaptation 32000
Q
Enter adaptation value XXXXX
-
Input the secret number, place a -0- before the 4 digit number (e.g. 01915).
-
Press -Q- button to confirm input.
NOTE:
If displayed
Function is unknown or can
->
not be performed at the moment