Passat Syncro Wagon V6-2.8L (ATQ) (2000)
3. Harness connector
4-pin connector, black
For HO2S -G39- before TWC and O2S heater -Z19-
For bank 1
4. Harness connector
3-pin connector, brown
For Knock Sensor (KS) 1 -G61-, bank 1
5. Engine - Coolant Temperature (ECT) sensor -G62-
6. Secondary Air Injection (AIR) solenoid valve -N112-
7. Intake Air - Temperature (IAT) sensor -G42-
8. Intake Manifold Change-Over Valve -N156-
9. Throttle valve control module -J338-
10. Harness connector
4-pin connector, black
For HO2S 2 -G108- before TWC and O2S heater -Z28-
Bank 2
11. Harness connector
3-pin connector, brown
For Knock Sensor (KS) 2 -G66-, bank 2
12. Harness connector
3-pin connector, gray
For Engine Speed (RPM) sensor -G28-
13. Engine Control Module (ECM) -J220-
Location in protective housing in, radiator tank on left
14. Fuel pressure regulator
15. Camshaft Position (CMP) sensor 2 -G163-
cylinder bank 2
16. Heated Oxygen Sensor (HO2S) 2 -G108-
Tightening torque: 50 Nm (37 ft lb)
Before TWC, cylinder bank 2
17. Engine Speed (RPM) sensor -G28-
18. Knock Sensor (KS) 2 -G66-
Cylinder bank 2
19. Valve -2- for camshaft adjustment -N208-
Cylinder bank 2
20. Ignition coils -N-, -N128-, -N158-
With power output stage -N122-
21. Knock Sensor (KS) 1 -G61-
Cylinder bank 1
22. Fuel injectors -N30-, -N33-, -N83-, -N84-
23. Camshaft Position (CMP) sensor -G40-
Cylinder bank 1
24. Ground connection
On engine support, right
25. Heated Oxygen Sensor (HO2S) -G39-
Tightening torque: 50 Nm (37 ft lb)
Before TWC, cylinder bank 1